Fridge Freezer shows alarm code ER - HI, CE, T1, T2, T3, T5, T6 on the display
Issue
Fridge Freezer shows code ER - HI, CE, T1, T2, T3, T5, T6 on the display
Applies to
- Refrigeration
Solution
Both Fridge & Freezer displays are used to communicate detected issues by a code on the display.
When error codes are displayed in the numeric display, the unit requires service attention.
Resolution
Er CE Communication Error
Turn the refrigerator off at the power point momentarily then switch back to see if this clears the communication error.
All other codes listed above
Check that all doors are fully closed.
Ensure that the over temperature alarm is not activated by placing hot food in the cabinet.
Ensure the over temperature alarm has not been activated due to a door being left open too long.
Contact an Authorized Service Center.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
Was this article helpful?
Related Articles
- Ice clumping, ice not dispensing, bad taste in ice, odd shaped ice
- How to change temp display for Celsius / Farenheight
- Freezer door pops open - Self-close not working
- Fridge Freezer shows alarm code ER - Cr, OC, SC, Alarm sounds and temperature icon flashes
- Fridge operating sounds
- How to Align and level the cabinet and doors
- Temperature Issues Troubleshooting - Refrigeration
- Mark resistant Stainless Steel - surface staining and surface rust removal
- Led interior Lighting not working
- Freezer - What to do if you Power failure (due to the failure of external power supply)
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.