When to change the robotic vacuum's batteries Pure i9
Issue
- When to change the robotic vacuum's batteries
- How to replace the batteries.
Applies to
- Robot Vacuum Purei9
Solution
The batteries need to be changed if the display no longer turns on, or the red battery symbol appears on the robotic vacuum.
- Failure code E:21 or E23 is shown this can be a sign of poor or not charged batteries.
Change the batteries - Battery Pack of 2 Part number 4060001007
Electrolux Webshop
How to change the Batteries.
The battery compartments are located on the bottom side of the robot.
1. Use a screwdriver (PH2) to unscrew the battery compartment lids.
2. Replace the battery packs and refit the battery compartment lids.
Caution! Make sure to change the two battery packs at the same time.
Was this article helpful?
Related Articles
- Electrolux | UltimateHome 300 robot vacuum How to set up video
- Electrolux | UltimateHome 300 robot vacuum maintenance
- How to maintain the UltimateHome 300 cordless handstick vacuum cleaner
- How to set up the UltimateHome 300 cordless Stick vacuum cleaner
- How to set up the UltimateHome 700 Wet & Dry cordless vacuum cleaner
- How to maintain your robotic vacuum with cleaning and care Pure I9
- How to maintain the UltimateHome 700 Wet & Dry cordless vacuum cleaner
- What can I do if the robotic vacuum's bumper gets stuck - Pure I9
- Robotic vacuum's Wi-Fi symbol has disappeared or is blinking Pure i9
- Robotic vacuum main brush is not working well