Robotic vacuum's Wi-Fi symbol has disappeared or is blinking Pure i9
Issue
- Robotic vacuum's Wi-Fi symbol has disappeared or is blinking
Applies to
- Robot Vacuum
- PI91-5SGM
- PI92-6SGMKIT
- PI92-6STN
Solution
It the robotic vacuum's Wi-Fi symbol light is on without blinking; it is in contact with the router.
What the Wi-Fi symbol on the display means:
Off
- The robot has not been onboarded (at least not successfully) and is not currently looking for a Wi-Fi network.
Blinking
- The robot has been onboarded at some point in the past and is attempting to connect to the cloud via the Wi-Fi network it was onboarded with. This is normal after the robot boots.
- If the local Wi-Fi is up but not connected to the internet this can also happen.
On
- The robot has established communication with the cloud via the local Wi-Fi.
Was this article helpful?
Related Articles
- Electrolux | UltimateHome 300 robot vacuum How to set up video
- Electrolux | UltimateHome 300 robot vacuum maintenance
- How to maintain the UltimateHome 300 cordless handstick vacuum cleaner
- How to set up the UltimateHome 300 cordless Stick vacuum cleaner
- How to set up the UltimateHome 700 Wet & Dry cordless vacuum cleaner
- How to maintain your robotic vacuum with cleaning and care Pure I9
- How to maintain the UltimateHome 700 Wet & Dry cordless vacuum cleaner
- When to change the robotic vacuum's batteries Pure i9
- What can I do if the robotic vacuum's bumper gets stuck - Pure I9
- Robotic vacuum main brush is not working well