Stick vacuum cleaner has reduced or no suction power
Issue
- Stick vacuum cleaner has reduced or no suction power
Applies to
- Stick Vacuum
Solution
1. Clean or wash the filters and put them back. Filters should be cleaned at least once a month to maintain them
Take out the filters from the dust container and empty the contents into a dustbin.
When the dustbin is not cleaned regularly this will lead to clogging the dustbin, which will affect the dust pickup and stress the fan motor.
The filters must be cleaned at regular intervals to ensure a high-cleaning performance
Please refer to the user manual for detailed information on the maintenance of your specific model.
Electrolux user manual
2. Clean and remove entangled hair, threads, and fibres from the brush roll
Use a pair of scissors to remove threads etc. Reassemble the brush roll, making sure it can spin freely.
3. Check nozzle bellow and hose if it’s blocked need to clean out.
You can purchase new filters in our Webshop.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
Electrolux Book a Service
Was this article helpful?
Related Articles
- Electrolux | UltimateHome 300 robot vacuum How to set up video
- Electrolux | UltimateHome 300 robot vacuum maintenance
- How to maintain the UltimateHome 300 cordless handstick vacuum cleaner
- How to set up the UltimateHome 300 cordless Stick vacuum cleaner
- How to set up the UltimateHome 700 Wet & Dry cordless vacuum cleaner
- How to maintain your robotic vacuum with cleaning and care Pure I9
- How to maintain the UltimateHome 700 Wet & Dry cordless vacuum cleaner
- When to change the robotic vacuum's batteries Pure i9
- What can I do if the robotic vacuum's bumper gets stuck - Pure I9
- Robotic vacuum's Wi-Fi symbol has disappeared or is blinking Pure i9