TURBO led flashes on the display - UltimateHome 700 Wet & Dry Vacuum
Issue
TURBO flashes on the display
Applies to
- UltimateHome 700 Wet & Dry Vacuum
Solution
Possible reason | Solution |
Suction mode is activated by pressing “+/-“ button for one second. | Press the “+/-“ button again to exit the Suction mode. |
Was this article helpful?
Related Articles
- Brush Roll not working properly - UltimateHome 900 Handstick Vacuum
- Empty Station Dustbin troubleshooting - UltimateHome 800 Cordless Handstick Vacuum with Clean Station
- Not Emptying into the Dust Bag – UltimateHome 700 Robotic Vacuum- Mop
- Cannot use app features - UltimateHome 700 Robotic Vacuum + Mop
- Wi-fi Onboarding and Loss of Connection – Trouble shooting Robot Vacuum EFR71222DS
- Self-cleaning does not start - UltimateHome 700 Wet & Dry Vacuum
- Filter icon on when vacuuming - UltimateHome 900 Handstick Vacuum Cleaner
- Charging issues troubleshooting - UltimateHome 900 Handstick Vacuum Cleaner
- Electrolux | UltimateHome 300 robot vacuum How to set up video
- Electrolux | UltimateHome 300 robot vacuum maintenance