Robotic vacuum cleans only the small part of the whole area
Issue
- Robotic vacuum cleans only the small part of the whole previously scanned area
- Robotic vacuum returns to the docking station too early
Applies to
- Robot Vacuum
- PI91-5SGM
- PI92-6STN
- PI92-6SGMKIT
Solution
1. Check if there is any dirt on the camera or laser windows and if so, wipe it off.
2. Try starting the robot from different locations and see if the behaviour is the same
3. Check if there is strong sunlight by the time it is scheduled and, in the area, where it starts if so try run it at a different time of the day.
4. Use the app to check if there are any software updates available, if yes update the robot.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
Electrolux Book a Service
Was this article helpful?
Related Articles
- Electrolux | UltimateHome 300 robot vacuum How to set up video
- Electrolux | UltimateHome 300 robot vacuum maintenance
- How to maintain the UltimateHome 300 cordless handstick vacuum cleaner
- How to set up the UltimateHome 300 cordless Stick vacuum cleaner
- How to set up the UltimateHome 700 Wet & Dry cordless vacuum cleaner
- How to maintain your robotic vacuum with cleaning and care Pure I9
- How to maintain the UltimateHome 700 Wet & Dry cordless vacuum cleaner
- When to change the robotic vacuum's batteries Pure i9
- What can I do if the robotic vacuum's bumper gets stuck - Pure I9
- Robotic vacuum's Wi-Fi symbol has disappeared or is blinking Pure i9