Fridge Freezer shows alarm code ER - HI, CE, T1, T2, T3, T5, T8 on the display
Issue
Fridge Freezer shows code ER - HI, CE, T1, T2, T3, T5, T8 on the display
Applies to
- Refrigeration
Solution
Both Fridge & Freezer displays are used to communicate detected issues by a code on the display.
When error codes are displayed in the numeric display, the unit requires service attention.
Resolution
Er CE Communication Error
Turn the refrigerator off at the power point momentarily then switch back to see if this clears the communication error.
All other codes listed above
Check that all doors are fully closed.
Ensure that the over temperature alarm is not activated by placing hot food in the cabinet.
Ensure the over temperature alarm has not been activated due to a door being left open too long.
Contact an Authorized Service Center.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
Electrolux Book a Service
Westinghouse Book a Service
Was this article helpful?
Related Articles
- Troubleshoot Wi-Fi Connectivity - Electrolux French Door Refrigeration
- Westinghouse - Moving the twist & serve dispenser to the other side of top mount freezer.
- No cube ice only crushed regardless of what ice type selected - Westinghouse
- Ice clumping, ice not dispensing, bad taste in ice, odd shaped ice
- Water/Moisture/Frost Inside Refrigerator
- Filter alert message - Vintec
- Fridge Freezer shows alarm code ER - Cr, OC, SC, Alarm sounds and temperature icon flashes
- How to change temp display for Celsius / Farenheight
- Fridge operating sounds
- Freezer door pops open - Self-close not working
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.