Charging problems Unknown block type "image", specify a component for it in the `components.types` option

Unknown block type "table", specify a component for it in the `components.types` option Unknown block type "image", specify a component for it in the `components.types` option If the above suggestions did not solve the problem, we recommend taking the product to the local service network for repair Contact an Authorized Service Center

Charging problems - UltimateHome 700 Wet & Dry Vacuum

Issue

Charging problems

Applies to

UltimateHome 700 Wet & Dry Vacuum

Solution

Possible reason	Solutions
The charging stand is not plugged in properly	Check that the plug is properly connected
The machine is not fully plugged into the charging stand	Check that the machine is positioned correctly
The adaptor is in poor contact with the charging stand	Check that the adaptor is properly connected to charging stand

If the above suggestions did not solve the problem, we recommend taking the product to the local service network for repair

Contact an Authorized Service Center

Was this article helpful?

Brands

Electrolux