Can I use the robotic vacuum in a different area (temporarily) without the charging station? Pure I9

Issue

  • Can I use the robotic vacuum in a different area (temporarily) without the charging station?

Applies to

  • Robot Vacuum
  • Pure I9
  • PI91-5SGM
  • PI92-6STN
  • PI92-6SGMKIT

Solution

1. The robotic vacuum can be used in a different area without a charger.

It will operate until the battery gets empty.

  • Start the robotic vacuum in the same position as the charger should be placed, place the robot on the floor against the wall.
  • Make sure there is an empty area of 0.5 m on the sides and 1.5 m in front of the robotic vacuum.
  • If the robotic vacuum was started outside the charger, it will return to the start position and just stop, without docking.
  • If you want to use the robotic vacuum regularly in different areas, you can buy an extra charging base for each area.

Was this article helpful?

Guides & Manuals

Find product support and manuals for your appliance.

Find your manuals

In Warranty Service & Repair

Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Check it out