User interface display beeping or changing settings randomly
Issue
User interface display beeping or changing settings randomly
Applies to
- Refrigeration
Solution
Check if the protective packaging film has been removed from the user interface boards.
The film should be removed when installing the product.
It may be hard to see the protective film, pick at the edge to gain to lift and remove the film.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
Electrolux Book a Service
Was this article helpful?
Related Articles
- Freezer or fridge section not cooling enough
- dE showing in the display and the cooling system is off lights working - activate/deactivate Demo Mode - Westinghouse
- Ice cubes are freezing together or hollow
- Ice maker is not making any ice
- Ice dispenser is jammed.
- Dispensed Water has an odd taste and/or odour.
- How to Align and level the cabinet and doors of your Electrolux French Door refrigerator
- Dispenser (Ice & water) Water not cold enough
- How to Video "Change Air filter, Air filter alarm, Air filter reset"
- Dispenser (Ice & water) not dispensing water
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.