Led interior Lighting not working
Issue
Led interior Lighting not working
Applies to
- Refrigeration
Solution
Note
The LED lighting is designed to turn on gradually. The LED lighting is designed to dim automatically if the door is left open for more than 5 minutes and turn off completely if the door is open for more than 7 minutes. Closing the door will reset the timer
- Check that the user interface is not in Sabbath Mode, Ice & Water models only.
When activated, all lights and UI will not work until Sabbath Mode is deactivated.
Note: The unit stays in Sabbath Mode after power outage recovery.
It must be deactivated by the user
Deactivate Sabbath mode - Press and hold Freezer and Drinks chill for 5 seconds
In the unlikely event the LED lights should fail, then the LED lights should be serviced by the service agent, to avoid safety hazards.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
Electrolux Book a Service
Westinghouse Book a Service
Was this article helpful?
Related Articles
- Troubleshoot Wi-Fi Connectivity - Electrolux French Door Refrigeration
- Filter alert message - Vintec
- Wine Cabinet - Operating noises
- Ideal serving/cellaring temperature + lighting mode
- Protection of wine labels - Vintec
- High Humidity Level inside wine cabinet and condensation - Vintec
- Stacking wine bottles and optimise the space in tall wine cabinet - Vintec
- Westinghouse- FlexSpace Convertible Compartment Settings and Shelf Configuration options
- Sb, 56 or 5b Displays in UI and Freezer Light/Fridge Light/ VCZ light and Dispenser light is not working, no functions can be changed or activated
- Mildew appearing on bottles, shelves, door gaskets (Vintec Wine Cabinet)