Fridge Freezer shows alarm code ER - Cr, OC, SC, Alarm sounds and temperature icon flashes
Issue
Fridge Freezer shows alarm code ER - Cr, OC, SC
Alarm sounds and temperature icon flashes
Applies to
- Refrigeration
Solution
Refrigeration - Electronic Control Display Models
Both Fridge & Freezer displays are used to communicate detected issues by a code on the display.
When error codes are displayed in the numeric display, the unit requires service attention.
Check that all doors are fully closed.
Ensure that the over temperature alarm is not activated by placing hot food in the cabinet.
Ensure the over temperature alarm has not been activated due to a door being left open too long.
Contact an Authorized Service Center.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
Electrolux Book a Service
Westinghouse Book a Service
Was this article helpful?
Related Articles
- Freezer or fridge section not cooling enough
- dE showing in the display and the cooling system is off lights working - activate/deactivate Demo Mode - Westinghouse
- Ice cubes are freezing together or hollow
- Ice maker is not making any ice
- Ice dispenser is jammed.
- Dispensed Water has an odd taste and/or odour.
- How to Align and level the cabinet and doors of your Electrolux French Door refrigerator
- Dispenser (Ice & water) Water not cold enough
- How to Video "Change Air filter, Air filter alarm, Air filter reset"
- Dispenser (Ice & water) not dispensing water
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.