Error EH0, EHI, EH2, EH3 Washer, Washer Dryer, Tumble Dryer
Issue
Washing machine displays error message:
EHO, EHI, EH2, EH3
Solution
EH0 - The mains power supply is unstable.
EH1 - The frequency of power supply is out of range.
EH2 - Supply voltage is too high.
EH3 - Supply voltage is too low.
- Make sure that the mains plug is connected to the mains socket.
- Never use an extension cable to connect appliances.
- Check the power cord / socket integrity.
- Remove the plug from the socket, wait 30 seconds and then plug it in again. After plugging in the appliance, switch it on and select a program.
- Check the power supply by plugging a different product into the same socket.
- Wait until the main supply is stable.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
AEG Book a Service
Electrolux Book a Service
Was this article helpful?
Related Articles
- Two-Step Start Requirement for Front Load Washers - Electrolux
- Front load washer, washer dryer, vented dryer displays error E40, E41
- The door of the washing machine cannot be opened
- "CLE" Appears on My Washing Machine Display
- Enabling/Disabling End-Of-Wash Buzzer - Top Loader Washing Machine (Westinghouse)
- How to clean and maintain your Electrolux Washer Dryer and extend its life
- Clothes are creased after drying in tumble dryer
- Tumble dryer damages clothes
- Can I wash shoes in the front load washing machine
- Tumble dryer shrinks clothes
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.