Enabling/Disabling End-Of-Wash Buzzer - Top Loader Washing Machine (Westinghouse)

Issue

Enabling/Disabling End-Of-Wash Buzzer

Applies to

• Top Load Washing Machine

Solution

This setting permits you to either enable or disable the buzzer at the end of the program. As an example, you might wish to disable this buzzer when you start a wash when going to bed, so that when the wash finishes approximately 1 hour later, it will not disturb you through the night.

Note: Error warning beeps such as critical faults are not disabled.

Enabling/Disabling End-Of-Wash Buzzer

To disable the buzzer sound, press “Water Level” and “Temp” touchpads at the same time about 3 seconds, the icon “boF ” will show on display along with buzzer sound.

To return to default configuration press these two touchpads at the same time about 3 seconds, the icon “boN ” will show on display along with buzzer sound.