Air Conditioner – Window Wall does not start
Issue
Air Conditioner – Window Wall does not start
Possible cause and troubleshooting
Applies to
- Air Conditioner - Window Wall
Solution
The air conditioner is unplugged.
Make sure the air conditioner plug is pushed completely into the outlet and switched on.
The fuse is blown/circuit breaker is tripped.
Check the house fuse/circuit breaker box and replace the fuse or reset the breaker.
Power failure.
If power failure occurs, switch off and disconnect/unplug the power cord. When power is restored, reconnect (plug in) the power cord, switch on the power and wait 3 minutes to restart the air conditioner to prevent tripping of the compressor overload.
If the problem still exists, disconnect the power and contact an Authorised Service Centre.