Air Conditioner – Window Wall is not cooling as it should
Issue
Air Conditioner – Is not cooling as it should
Possible cause and troubleshooting
Applies to
- Air Conditioner - Window Wall
Solution
Airflow is restricted.
Make sure there are no curtains, blinds, or furniture blocking the front of the air conditioner.
The air filter is dirty.
Clean the filter at least every 2 weeks.
The room may have been hot.
When the air conditioner is first turned on you need to allow time for the room to cool down.
Cold air is escaping.
Check for open furnace floor registers and cold air returns. Set the air conditioner's vent to the closed position.
Cooling coils have iced up.
Ice blocks the air flow and stops the air conditioner from cooling the room.
Set the fan at MED or HIGH until the ice melts
If the problem still exists, disconnect the power and contact an Authorised Service Centre.
Was this article helpful?
Related Articles
- Air Conditioner emits Hissing - Squeaking - Rushing Air sounds
- How do I schedule my air purifier?
- How do I connect more air purifiers to the Electrolux app?
- Why is speed 2 in my air purifier the lowest speed in smart mode?
- Can I use the air purifier in the basement or near humidifiers?
- Unable to start Smart mode on my air purifier
- How should I clean my air purifier EP53-47SWA, EP62-27SWA
- Westinghouse Air Conditioner - How to use the Remote Controller
- Air Conditioner water not draining – Window Wall
- My air purifier will not start