Air Conditioner - Indoor unit displays DF and heating operation stops
Issue
Air Conditioner Indoor unit displays DF
Heating operation stops suddenly
Applies to
- Air Conditioner - Split System
Solution
DF on the display indicates the unit has entered into defrost mode.
In HEAT mode, the indoor unit temporarily stops for maximum of 10 minutes to perform the automatic defrosting operation.
Note: A Mist come out of the indoor unit due to moisture generated from defrosting process when the air conditioner restarts in HEAT mode operation after defrosting.
Defrosting
When there is too much frost on outdoor condenser, the complete unit will enter into an automatic defrost function. During defrosting process, DF is displayed. Note: The unit will operate for a minimum of (23 minutes) between each defrost function
Was this article helpful?
Related Articles
- Air conditioning | How to connect to the +home app
- Air conditioner - Unit not cooling or heating room very well
- Westinghouse air conditioning | How to set up FollowMe function
- Air Conditioner Unit will not activate/operate
- Air Conditioner - Condensation or moisture dripping from indoor unit
- Air Conditioner – Window Wall is not cooling as it should
- How should I clean my air purifier EP53-47SWA, EP62-27SWA
- How should I clean my air purifier Well A5
- Air Conditioner – Window Wall Cleaning and Maintenance
- Air Conditioner – Window Wall does not start