Warmer Drawer Installation Guide

Q: Warmer Drawer Installation Guide

When building in the combination appliance, it is essential to follow the instructions given in the operating and installation instructions supplied with the combination appliance. NOTE: The warming drawer may only be built in combination with those appliances quoted by Electrolux as being suitable. Electrolux cannot guarantee trouble-free operation if the appliance is operated in combination with appliances other than those quoted by Electrolux as being suitable. When building in the warming drawer in combination with another suitable appliance, the food warming drawer must be fitted above a fixed interim shelf in the housing unit. Please ensure that the housing unit can support both its weight and that of the other appliance. As the combination appliance is placed directly on top of the warming drawer once it is built in, an interim shelf is not necessary between the two appliances. The appliance must be built in so that the contents of the drawer can be seen. This is to avoid scalding from hot food spilling over. There must be enough space for the drawer to be pulled out fully. Use 4x appropriate screws to fix the warming drawer to the cabinet. Open the warming drawer and screw in the front corners. For product dimensions and installation requirements please refer to the user manual. AEG user manua l Electrolux User manual

Question

Accepted Answer

When building in the combination appliance, it is essential to follow the instructions given in the operating and installation instructions supplied with the combination appliance.

NOTE: The warming drawer may only be built in combination with those appliances quoted by Electrolux as being suitable. Electrolux cannot guarantee trouble-free operation if the appliance is operated in combination with appliances other than those quoted by Electrolux as being suitable.

When building in the warming drawer in combination with another suitable appliance, the food warming drawer must be fitted above a fixed interim shelf in the housing unit. Please ensure that the housing unit can support both its weight and that of the other appliance.

As the combination appliance is placed directly on top of the warming drawer once it is built in, an interim shelf is not necessary between the two appliances. The appliance must be built in so that the contents of the drawer can be seen. This is to avoid scalding from hot food spilling over. There must be enough space for the drawer to be pulled out fully.

Use 4x appropriate screws to fix the warming drawer to the cabinet. Open the warming drawer and screw in the front corners.

For product dimensions and installation requirements please refer to the user manual.

AEG user manual

Electrolux User manual

Warmer Drawer Installation

Issue

Applies to

Solution

Was this article helpful?