Tumble dryer displays error message "Err" or 3 lines in the display
Issue
Tumble dryer displays error message "Err" or " - - - ".
Applies to
- Heat Pump Dryers
- Condenser Dryers
Solution
Indicates a wrong selection with the selected program.
Make sure that the additional options selected are suitable for the program selected.
- Change a program
- 1. Press the on/off button to deactivate appliance
- 2. Press the on/off button to activate the appliance.
- 3. Set the program.
Refer to the options table in the user manual.
To find out more about your specific model download your user manual.
Was this article helpful?
Related Articles
- Unable to connect to Wi-Fi network 700 series
- Unable to connect to Wi-Fi network 900 series
- Enabling/Disabling End-Of-Wash Buzzer - Top Loader Washing Machine (Westinghouse)
- Drying Temperature of Electrolux Heat Pump Tumble Dryer
- Can I wash shoes in the front load washing machine
- "CLE" Appears on My Washing Machine Display
- Care and cleaning the washing machine’s rubber door seal
- How to clean and maintain your Electrolux Washer Dryer and extend its life
- Error Code EF0 - Top Loader Washing Machine (Westinghouse)
- No water is visible in the drum - Front Load Washer