Tumble dryer displays error message E5A
Issue
Tumble dryer displays error message E5A
Applies to
- Heat Pump Dryers
- Condenser Dryers
Solution
E5A - Appliance motor overloaded.
Check the load size, to ensure the machine is not overloaded.
Check load size is correct for the cycle selection and reload the laundry.
Note: The maximum weight refers to dry items.
Remove the laundry from the drum.
Set the program and re‐ start the cycle.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
AEG Book a Service
Electrolux Book a Service
Was this article helpful?
Related Articles
- "CLE" Appears on My Washing Machine Display
- How to reset Wi-Fi network settings on my Laundry Product
- Connected appliances - problems with onboarding and Wi-Fi connection
- Unable to connect to Wi-Fi network 900 series
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front Load washer displays error ECE
- No water is visible in the drum - Front Load Washer
- How to clean and maintain your Electrolux Washer Dryer and extend its life
- Connect your Electrolux Laundry product to the Electrolux App - Video
- Electrolux Ultimate Care 900 dryer- SmartSelect How to set programs (Video)
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.