Oven displays error F908, F113
Issue
The oven displays F908 or F113 and cannot set oven cooking functions.
Applies to
- Built-In Oven
Solution
F908, F113 – The oven system cannot connect with the control panel.
- Restart the appliance and check that it works correctly after switching it back on.
Note: To restart the appliance, disconnect it from the mains and wait at least 30 seconds before switching it back on.
In the case of built-in appliances, it is unnecessary to disconnect the cable physically - the appliance can be disconnected using the household RCD breaker.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
AEG Book a Service
Electrolux Book a Service
Was this article helpful?
Related Articles
- Oven displays error F111 when selecting Food Sensor Probe function
- How to set or adjust the clock - Electrolux oven
- Oven displays error F239
- Microwave - the interior light is not working lamp replacement instructions
- Oven light does not work
- Burner not lighting, holding flame, staying alight or flame lifting.
- The Hob2Hood function does not work with the cooker hood
- The cooker hood is dripping water
- Oven displays error F101 or F102
- After a short power failure, Demo appears on the display and my oven will not heat up - Electrolux
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.