Oven displays Error F131, F144, F508
Issue
Oven displays Error F131, F144, F508 on Steam function setting
Applies to
- Built-In Oven
Solution
F131 -Indicates: The temperature of the steamer sensor is too high.
- Turn the oven off and wait until it cools down. Turn the oven on again.
F144 – Indicates: The sensor in the Water drawer cannot measure the water level.
- Empty the Water drawer and refill it.
F508 – Indicates: The Water drawer does not work properly.
- Turn the oven off and on.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Centre.
Was this article helpful?
Related Articles
- Discoloured marks or bubbles ceramic glass cleaning tips
- Stains or marks on SaphirMatt cooktop – Cleaning advice
- How to use the SenseFry function on your Electrolux Induction cooktop
- How to change and maintain your Electrolux Rangehood filter - Long life filter
- Carbon Filters How often should you replace them
- How to set or adjust the clock - Electrolux oven
- Hob displays message A
- Oven displays error F101 or F102
- Cleaning Oven Door - Video
- How To Assemble The Telescopic Runners In Your Electrolux Oven
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.
Related Articles
- Discoloured marks or bubbles ceramic glass cleaning tips
- Stains or marks on SaphirMatt cooktop – Cleaning advice
- How to use the SenseFry function on your Electrolux Induction cooktop
- How to change and maintain your Electrolux Rangehood filter - Long life filter
- Carbon Filters How often should you replace them
- How to set or adjust the clock - Electrolux oven
- Hob displays message A
- Oven displays error F101 or F102
- Cleaning Oven Door - Video
- How To Assemble The Telescopic Runners In Your Electrolux Oven