Oven blows / trips fuses

Issue

  • The oven / cooker blows / trips the fuse
  • The oven is not working, the display is blank
  • The oven has no power

Applies to

  • Oven

Solution

For any issues with the power supply we recommend contacting an Authorized Service Center.

For your safety, we would not encourage customers to fix this themselves.

Fuses can trip due to damage to cables, water, faulty installation, overloaded circuits, or several other issues.

New Appliances

If the appliance has recently been installed or a new appliance has been added to your kitchen, this could indicate an installation error. In this instance, we would recommend contacting your installer or electrician.

How to check

To check which appliance is causing the fault

  1. Switch off power in the consumer unit
  2. Turn off as many other appliances as possible
  3. Switch the power back on at the consumer unit
  4. Switch the oven back on.

Is the appliance working as expected? This will determine if there is a fault with the oven or if there are too many appliances on the circuit.

Existing Appliances

If you have added a new appliance to your kitchen, this may be causing other appliances to trip. Please check using the technique above

Within an oven, there are several components that, over time, could develop a fault

The supply tripping indicates that a fault could be potentially harmful if the appliance or power supply is not put in a safe mode, i.e. tripped.

The only part we would suggest can be investigated with the appliance switched off at the mains is the oven bulb (or lamp)

If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.

AEG Book a Service

Electrolux Book a Service

Electrical appliances can present a risk of harm. Please don't attempt to investigate your fault unless you are qualified to do so.

Was this article helpful?