Microwave - the interior light is not working lamp replacement instructions
Issue
Built-in Microwave combination interior light replacement instructions
Applies to
- Microwave Combination Oven
Solution
These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance.
Replacing the lamp
Turn off the oven. Wait until the oven is cold.
Disconnect the oven from the mains, by switching off at the circuit breaker
For product with side lamp - Remove the left shelf support to get access to the lamp
Put a cloth on the bottom of the cavity
Turn the glass cover counterclockwise to remove it.
Clean the glass cover.
Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp
Replace the lamp with an applicable 300 °C, G9 230V 25W heat resistant lamp.
Install the glass cover.
After lamp replacement, should the oven lamp still not operate, we recommend contacting an Authorized Service Center.
AEG Book a Service
Electrolux Book a Service
Was this article helpful?
Related Articles
- Oven Child Lock - Turning On and Off Electrolux
- Microwave Care and Cleaning Maintenance
- Microwave - Turntable grates or grinds
- Burner not lighting, holding flame, staying alight or flame lifting.
- The drawer under induction hob gets hot
- Microwave will not switch or cannot set a function
- Using the Oven Grill Function in my Electrolux oven
- Food Sensor/probe temperature setting not displayed
- Induction hob emits an unusual sound
- Microwave function in my microwave / compact oven does not work
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.