Induction Cooktop timer function the cooktop deactivates before countdown time is reached.

Question

Accepted Answer

Eco Timer

Whenever the countdown timer is used the heat setting will deactivate before the final countdown time is reached.
Residual heat left in the cookware will complete the final stage of cooking and hence some energy is saved.
The difference in the operation time depends on the heat setting level and the length of the cooking operation.

Slide Control

Timer - The countdown timer

Use the countdown timer to set how long you want a cooking zone to operate.

To select the cooking zone: touch the 'timer sensor' again and again until the correct zone indicator is displayed.
Immediately, touch the (+ ) sensor to set the time (00 - 99 minutes). When the timer indicator of the cooking zone starts to flash more slowly the time will begin to count down.
To see the remaining time, select the cooking zone with the 'timer sensor'. The display will show the remaining time.
To change the countdown timer: select the cooking zone with the 'timer sensor' and touch (+ ) or ( - )
To deactivate the countdown timer, select the cooking zone with the 'timer sensor' and touch the ( - ) until the time counts down to 00. The timer indicator will go out. When the timer count down comes to an end, the cooking zone will deactivate, the 00 will flash and a beep sound will occur for 20 seconds.
The beep sound and flashing can be deactivated immediately by touching the 'timer sensor'.

IMPORTANT! When the two timer functions operate at the same time, the display shows the count up timer first.

TFT Touchscreen

Timer - Count down Timer

Induction Cooktop 'timer function' Cooktop deactivates before countdown time is reached