How do I replace the filter in the Well A5 Air purifier

Issue

• How do I replace the filter in AX5 / AX7 air purifier?

Applies to

• Air Purifier

Solution

NOTE: The filters – except for the mesh pre-filter - cannot be washed and must always be replaced when at end of life. The WELL A5 series air purifiers have a variety of filters to choose from, tailored to your lifestyle needs. Each filter layer is equipped with a smart RFID tag to uniquely identify it as well as to track its usage over time.

1. Remove the front panel of the appliance by pulling it outward.

2. Take out the used / dirty filter(s), pulling them via the inbuilt handle in the frame. Discard in a hygienic way.

3. Please remove the plastic packaging from the replacement filter and insert the filter in the appropriate place. Please ensure the VOC carbon filter goes in first inside the unit, followed by the ultrafine particle filter. Reinsert the mesh pre-filter and close the front panel. The filter change icon on the product control panel will no longer be lit and the Electrolux App will indicate the same, with a new filter lifetime reading