Electrolux WELL A5 series Air purifier lamp flashes white
Issue
- Air purifier lamp flashes slowly white
Applies to
- Air Purifier
Solution
When powered on it will take about 10 seconds for the sensors to calibrate and analyze the air quality before ramping up to the appropriate fan speed.
During this time, the air quality indicator will pulsate slowly in white.
As soon as the analysis is complete, the colour will change again automatically
LAMP COLOUR | PM 2.5 (μg / m3) | AIR QUALITY |
Green | 0-12 | Very good |
Yellow | 13-35 | Good |
Orange | 36-55 | Mediocre |
Red | 56-150 | Very mediocre |
Violet | 151-250 | Bad |
Brown | > 250 | Very bad |
Was this article helpful?
Related Articles
- The air quality light is red or purple too often and the PM 2.5 values shown in the app are very high all the time
- Can I wash the air purifier filter?
- How often should I replace the filter in my Well A5 Air purifier?
- My air purifier will not start
- Portable air conditioner displays code L3
- How do I schedule my air purifier?
- How do I connect more air purifiers to the Electrolux app?
- Why is speed 2 in my air purifier the lowest speed in smart mode?
- Can I use the air purifier in the basement or near humidifiers?
- Unable to start Smart mode on my air purifier
Related Articles
- The air quality light is red or purple too often and the PM 2.5 values shown in the app are very high all the time
- Can I wash the air purifier filter?
- How often should I replace the filter in my Well A5 Air purifier?
- My air purifier will not start
- Portable air conditioner displays code L3
- How do I schedule my air purifier?
- How do I connect more air purifiers to the Electrolux app?
- Why is speed 2 in my air purifier the lowest speed in smart mode?
- Can I use the air purifier in the basement or near humidifiers?
- Unable to start Smart mode on my air purifier