Water is flowing back into the dishwasher

Issue

  • Water is flowing back into the dishwasher. The problem is caused by the drain hose.

Applies to

  • Dishwasher

Solution

1. Ensure that the drain hose has been installed correctly.

Make sure that:

  • The length of the drain hose does not exceed 400 cm.
  • The drain inlet point must be between 40 and 85 cm.
  • The drain hose is not damaged, kinked or twisted.

If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.

AEG Book a Service

Electrolux Book a Service

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.

Was this article helpful?

Guides & Manuals

Find product support and manuals for your appliance.

Find your manuals

In Warranty Service & Repair

Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Check it out
Water is flowing back into the dishwasher | Electrolux