Program duration is different than the duration listed in the user manual
Issue
The displayed program duration is different than the duration in the consumption values table listed in the user manual
Applies to
- Dishwasher
Solution
The displayed program duration is different than the duration in the consumption values table listed in the user manual
The remaining time in the display increases and skips nearly to the end of the program duration.
The following can contribute to the cycle time value changes
- The pressure and the temperature of the water
- Variations of the mains supply
- Additional options added to selected cycle
- the quantity of dishes and the degree of soil
- The values for programs other than ECO are indicative only
This is not a defect, the appliance is working correctly.
Was this article helpful?
Related Articles
- Dishwasher displays error code i30
- Dishwasher short-circuits, burns out fuses or trips RCD circuit breakers
- Dishwasher does not switch on, no light on the control panel
- Electrolux Dishwasher does not dry or dries poorly
- How to load and unload the dishwasher?
- Dishwasher not cleaning properly
- Dishwasher displays error code i10, i11 beeps once, or the warning light flashes once
- Program not starting and cycle indicator light flashing on dishwasher
- Water is flowing back into the dishwasher
- Dishwasher comfort lift basket stuck in the UPPER position