Dishwasher error code i60 in the display

Issue

• Dishwasher is showing error codes and not heating or drying
• Dishwasher displays error codes i60
• The lights related to MY TIME selection bar flash 6 times intermittently

Applies to

• dishwasher

Solution

Make sure the water inlet water temperature is not exceeding 60°C at the connection point, as this will have an adverse reaction to the enzymes in the detergent and can give poor washing results

Before any maintenance other than running the programme Machine Care, turn off the appliance and empty it.

• Check your dishwasher filter and sump for signs of foam/suds & debris
• Clean all filters

• Check and clean the spray arms.

• Start the Machine Care programme with a descaler designed for dishwashers, this will also descale the heater element.

• On the next wash programme cycle, check if the fault has cleared.
• If the cycle starts and operates normally, the problem has been resolved.

Contact an Authorized Service Centre.

If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.