Dishwasher does not switch on, no light on the control panel
Issue
- The dishwasher does not switch on, no light on the control panel
Applies to
- Dishwasher
Solution
If the appliance is not switching on and there are no lights on the control panel it usually indicates an issue with the power supply.
- Make sure that the mains plug is connected to the mains socket.
- Make sure that there is no damaged fuse in the fuse box.
- Do not use multi-plug adapters and extension cables.
- Check the power supply to the appliance, connect another small appliance to the supply socket to test.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
AEG Book a Service
Electrolux Book a Service
Was this article helpful?
Related Articles
- Dishwasher displays error code i30
- Dishwasher short-circuits, burns out fuses or trips RCD circuit breakers
- Electrolux Dishwasher does not dry or dries poorly
- How to load and unload the dishwasher?
- Dishwasher not cleaning properly
- Dishwasher displays error code i10, i11 beeps once, or the warning light flashes once
- Program not starting and cycle indicator light flashing on dishwasher
- Water is flowing back into the dishwasher
- Dishwasher comfort lift basket stuck in the UPPER position
- Dishwasher door does not close