Dishwasher displays error message i10 or i11, does not fill with water

Issue

  • Dishwasher displays error message i10 or i11
  • The appliance does not fill with water

Applies to

  • Dishwasher

Solution

  • Make sure that the water tap is open.
  • Make sure that the filter in the inlet hose is not clogged.
  • Make sure that the inlet hose has no kinks or bends.
  • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.

Water supply pressure bar (minimum and maximum) 0.5 - 10

kPa (minimum and maximum) 50 - 1000

If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.

AEG Book a Service

Electrolux Book a Service

Was this article helpful?

Guides & Manuals

Find product support and manuals for your appliance.

Find your manuals

In Warranty Service & Repair

Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Check it out
Dishwasher displays error message i10 or i11, does not fill with water | Electrolux